hello today in the second video on extremesfx docomomo transforming yourself into a bloody accident victim to do this you will need a few things your pre-made latex wounds alcohol Spirit G spirit gum remover liquid latex makeup sponges translucent powder and a powder brush next hold the first latex piece in position on the face and press powder onto the edges now you have an outline that you can follow to apply the spirit gum apply spirit gum to the area inside the p outline and then tap the spirit gum with your finger till it is tacky this is what activates the adhesive when the spirit gum becomes tacky lay the latex piece into place and press firmly add extra spirit gum under the edges of the prosthetic if needed repeat these steps for as many latex wounds as you wish to add to your look we used a large gash on One Cheek another on the fourhead and a small cut on the other cheek make an outline of the piece apply and tap the spirit gum then press the latex prosthetic onto the sticky spirit gum and if needed touch up any edges be careful not to apply the spirit gum too close to the eyes or in the eyebrows once you have all of the latex SWS you want applied powder around the edges to make any of the exposed spirit gum not tacky to better blend the latex Prosthetics onto the face we stippled liquid latex over the edges of the pieces and out onto the face we like using a torn makeup sponge for stippling liquid latex this step isn't totally necess necessary but it really does help blend away any thick edges and makes the latex pieces look more realistically like part of the face thank you for watching the second video of our bloody accident victim makeup tutorial series you can purchase all of the products used in this video at extremesfx docomo this tutorial like share comment and check out the next video at extremes effect.com to learn how to color the latex wind Prosthetics you just applied