[Music] all right next up we've got high-speed drill centers this is a dc1 and we got the dc2 over there we'll look at that in a minute these are 30 taper machines Frank you want to come in closer take a look at it we got a 21 tool tool changer here 21 station tool changer these machines are available with 10 15 and 20K spindles so for all your lighter Milling Drilling and tapping needs these machines are fantastic super fast tool change speeds of course both both the dc1 and dc2 feature rear chip evacuation so you can stack these machines next to each other maximize your floor space so the travels on the dc1 are roughly 24 by 18 in let's take a look at the larger brother to this one which has 40x 20 travels this is the dc2 we're just releasing this now same concept high-speed drill Center but with much greater xaxis travel same 30 taper spindle and 21 Tool uh tool changer if you push in though you can see how here we're doing a much longer part in X doing Drilling and tapping and Milling all along this longer aluminum Extrusion here again you can have the option of 10K 15K or 20 K RPM spindles the dc1 is list for 45,000 and the dc2 here lists for 60k [Music]